Problem: Blank prints or faded prints
Printouts are coming out very faded, blank or with the incorrect colours. This might be due to a blockage in the print nozzles caused by dried ink or an air lock.
Resolution
This problem can easily be remedied by carrying out a simple manual cleaning procedure:
- Dampen a cotton bud in warm water and gently wipe around the print head area at the base of the cartridge.
- Dab the print head onto a clean, absorbent paper towel to filter the ink for 10 minutes. The dry ink should slowly come out and get absorbed to the towel unclogging the head print.
- Clean the contact points in the printer and cartridge using a dry paper towel to gently
Tip: Repeat the process if needed, and always ensure the cartridge is properly seated in the printer after cleaning.
Printers that use Brother LC3211VAL cartridges
To see a full list of products that work in your printer, click on the model name below:
|
|
|
All trademarks, photos and logos included on this information sheet are the property of their respective owners.
Brand names and trademarks are the property of their respective holders and are used for description purposes only.