Problem: Fading on print
Printouts are very faded print or there is a lack of print on the page
Resolution
- If the print quality is poor or no ink is appearing on the paper then try doing 2-3 head cleans/nozzle cleans
- Leave 20 minutes between each clean
Problem: Printing blank pages
The ink cartridge printed one or two pages and then stopped printing.
Resolution
- It could be that the tape that covers the breathing hole has not been removed
- Be sure the breathing hole on the cartridge has been released usually by removing a small “rip strip” so that the cartridge has air supply then it can print.
|
This image shows the front of the cartridge, match the colour to the slot in the printer.
|
|
|
|
The back of the cartridge can be seen in this image.
|
|
|
|
This image shows the top of the cartridge, the chip must be clear of impurities before installation.
|
|
|
|
The bottom of the cartridge can be seen in this image.
|
|
|
Printers that use Brother LC426 cartridges
To see a full list of products that work in your printer, click on the model name below:
|
|
All trademarks, photos and logos included on this information sheet are the property of their respective owners.