What the cartridges should look like
|
|
|
|
|
|
Installation Instructions
Text Instructions
1. Open the operation panel
2. Remove the used film
3. Remove the two green gears from the used film (Don't discard the two green gears)
4. Remove the new roll of imaging film from its packaging
- 4a. Remove the band that holds the rolls together
5. Insert the green gears as shown
- 5a. If needed, pull the spools apart slightly to allow the gears to fit (the band will stretch)
6. Insert the film into the print compartment as shown
7. Rotate the front spool as shown until the film is taut
8. Close the operation panel (press down on both sides to make sure it clicks into place)
Visual Instructions
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
-
- All trademarks, photos and logos included on this information sheet are the property of their respective owners.