TS3350
The video below shows what the compatible PG-545XL /CL-546XL cartridges look like for this printer
Cartridge not recognised
- Make sure all of the tabs have been removed from the cartridge. This includes the one which covers the printhead.
- If tabs have been removed, perform the usual troubleshooting:
- Wipe the chip with a dry cloth.
- Unplug the printer and wait for 10 minutes.
- Re-install the cartridge.
- If the error still shows, try removing and re-installing the cartridge 1-2 times.
Cartridge missing or damaged
- Remove the faulty cartridge from the printer.
- Make sure all the packaging clips and blue tape covering the copper part of the cartridge has been removed from the cartridge.
- Clean the contacts with a dry cloth or tissue.
- Pull the power cable out the back of the printer and leave the printer off for 15 minutes.
Low/Empty Ink
Resolution 1
Printer is not allowing printing as it believes the cartridge to be out of ink
Resolution
- Please press and hold the printers Stop button (or power/start button depending on what the error message says) until the error message disappears from the screen (Usually 5-10 seconds). Sometimes this will need to be repeated twice.
- Note: This has to be done whilst the error message is on screen.
STOP button
- This will disable ink level indicator for the mentioned cartridge and the printer would resume printing.
- Note: This message will appear ONCE for each cartridge.
- The cartridge will NOT need replacing after this is done.
- Print quality will have to be used to determine how much ink is left.
- Note: Print quality deteriorates quickly when the cartridge is out of ink.
Empty black cartridge error message
Empty colour cartridge error message
Printout to show print quality deterioration
Resolution 2
Printer is not allowing printing as it believes the cartridge has been previously used
Resolution
- After the following error message (see below) appears on your screen press the printers Start button once
Previously used / Low ink error
- This will clear the error message and allow for printing. However the ink status monitor will be disabled.
- Print quality will have to be used to determine how much ink is left.
Note: Print quality deteriorates quickly when the cartridge is out of ink.
Printout to show print quality deterioration
Ink in the cartridge, but not printing
- The cartridge may show as empty or produce faded print despite ink remaining.
- Printing stops once the cartridge reaches around 30% remaining ink, which is kept as a reserve.
- This reserve cannot be accessed and is used to keep the internal sponge moist and protect the printhead.
- This is normal behaviour and not a fault.
- The cartridge will need to be replaced.
Printing blank pages / fading on print
- Clean the printhead with a piece of damp kitchen tissue (warm water).
- If this doesn't work, sit the cartridge printhead on some moist kitchen roll for 20 minutes.
- Make sure the bottom of the cartridge (where the ink comes out of) is touching the kitchen roll.
Printers that use Canon PG-545 / PG-545XL / CL-546 / CL-546XL cartridges
To see a full list of products that work in your printer, click on the model name below:
Printer Consumables (Canon PG-545 / CL-546)
| 8286B006 | 8286B006-CARTRIDGE | CL-546 | CL-546XL |
| PG-545 | PG-545XL | 8286B006-REM | PG545XL-CL546XL |
| 8286B006-OLD2 | PG-545XL-REM | CL-546XL-REM | CL-546XL-3PACK-REM |
| PG-545XL-3PACK-REM | 8287B008 | PG545-CL546 | 8286B015 |
| 8286B013 | 8286B012 |
Brand names and trademarks are the property of their respective holders and are used for description purposes only.
Brand names and trademarks are the property of their respective holders and are used for description purposes only.