MFP M479fdn
Compatible HP 415X Toners
|
This image shows the front of the cartridges.
The chip must be clear of impurities before
installation.
|
|
|
|
This is the back of the cartridges. The orange
clip must be removed before installation.
Some
may be secured with plastic ties, which can
be
cut off.
|
|
|
|
This image shows the left side of the cartridges.
Use the handle in the middle to insert the
cartridge
into the printer.
|
|
|
|
This image shows the right side of the cartridges
with the plastic gears visible.
|
|
|
Compatible HP 415A Toners
|
This image shows the front of the 415A cartridges.
The chip must be clear of impurities before
installation.
|
|
|
|
The back of the 415A cartridges showing the
orange
clip that must be removed before installation.
|
|
|
"Used Cartridge Installed"
- Please note this is just a warning message.
- When the message appears, press OK to continue.
- You should now be able to print as normal.
- This error should only appear once for each cartridge.
"Non HP-Chip detected"
- This could be due to a new HP firmware update on the printer.
- Please contact our customer care centre for more information.
"Non HP Cartridges"
- This is just a warning message to state that the cartridges are not genuine HP. This is not an error.
- When the message appears, press OK to continue.
- You should now be able to print as normal.
"Cartridge Memory Missing"
- Remove the cartridge from the printer and switch the machine off at the mains for 10 minutes.
- Clean the chip with a lint-free cloth or tissue.
- Reinstall the cartirdge.
My prints are faded
- If the print quality is poor, remove the toner cartridge from the printer and gently rock it side to side.
- This movement helps distribute the toner evenly within the cartridge.
- After rocking the cartridge 5–6 times, reinsert it and print a test page.
- If the issue persists, check the life of maintenance items in case they need replacing
I'm seeing streaks on my prints
- Remove the toner cartridge from the printer and gently rock the cartridge from side to side.
- This movement helps distribute the toner evenly within the cartridge.
- Carefully clean the drum roller to remove any excess toner.
- Re-insert the cartridge into the printer and print a test page.
- If the problem persists, repeat the previous steps.
There are faint characters on my prints
- Printouts have faint characters / letters appearing down the page.
- Print 15–20 pages and see if the problem persists.
Printers that use HP 415A / 415X cartridges
To see a full list of products that work in your printer, click on the model name below:
Printer Consumables
| W2030A | W2031A | W2032A | W2033A |
| 415X-PACK | W2030X | W2031X | W2032X |
| W2033X | HP415A-PACK | W2030A-REM | W2031A-REM |
| W2032A-REM | W2033A-REM | HP415A-PACK-REM | 415X-PACK-REM |
| HP415-PACK | CF404A |
Brand names and trademarks are the property of their respective holders and are used for description purposes only.
Brand names and trademarks are the property of their respective holders and are used for description purposes only.