DCP-L2620DW
Replace Toner / Toner Low / No Toner Installed
-
With Brother consumables, you have to manually reset the counter
to let
the machine know an item has been replaced.
- Make sure the machine is turned on.
- Make sure the machine's cover is closed.
- Press Back to ensure you're on the screen home page
- Press Down to find General Setup and press OK
- Press Down to find Replace Toner and press OK again
- Press Down to find Continue and press OK
- When the printer shows Accepted on the screen, the count is now reset and the printer should be ready to use
Replace Drum / Drum End / No Drum Installed
My prints are faded
- If the print quality is poor, remove the toner cartridge from the printer and gently rock it side to side.
- This movement helps distribute the toner evenly within the cartridge.
- After rocking the cartridge 5–6 times, reinsert it and print a test page.
- If the issue persists, check the life of maintenance items in case they need replacing.
I'm seeing marks on the page
- Toner powder contamination can be found under the printer’s paper feed roller, often due to dust and toner build-up.
- Clean the printer’s paper feed roller thoroughly to remove any toner powder or dirt.
- After cleaning or replacement, print a test page to verify if the issue is resolved.
Printers that use TN-2510 / TN-2510 cartridges
To see a full list of products that work in your printer, click on the model name below:
Printer Consumables
| TN-2510 | TN-2510XL | DR2510 | TN-2510-REM |
| TN-2510XL-REM | DR2510-REM |
Brand names and trademarks are the property of their respective holders and are used for description purposes only.